The Workshops

My Spare S.I.C. Engine.

Got the pin out, and the sprocket off - had to file down a number of bumps in the end of the crank

This photo shows the badly worn sprocket - so will need a new one fitted.

Now - how does it go together.

Everything in a box, ready for a rebuild.

The block, sump, and associated parts will be sent off for a proper clean

I already need to source a gasket set, new seals and new roller bearings.


S12D Lead | The Workshop | Section Car Page

Page Developed February 14, 2004

©Nic Doncaster