Our SIC Fleet No 34
Day One of the Project
The motor is out and work is happening. Most of todays work was getting the valves out, the ports cleaned, and the valves lapped back in and seated.
First Job, after pulling all the crap off. was to release the valves so I could clean them up. This is the valve compressor working on the exhaust valve
Valves relapped, head back on!
This is the clutch carrier assembly. Part of the unit has been removed, leaving one of the driven plates and their carrier visible. the shaft shows some of the wear through rough handling. Still servicable though.
© Nic Doncaster